Gabe O'Leary
← Back to the map

How Seward Park's trees were measured

In 2021 King County flew a plane over the park that fired a laser at the ground many thousands of times a second and timed each reflection. The map of the park's 519 trees over 150 feet is worked out from those reflections, called returns. Here is what they look like around one tree.

One tree up close

This is the tallest tree in the park, 201.6 feet, standing 273 feet from Sqebeqed Trail. Both drawings show the same 223 feet of forest around it.

laser returns per square foot
1.8
width of one square in the height model
20 in
returns within 3 ft of the very top
25

From the side: the raw returns

A 10 foot thick slice of forest through the treetop, looking north. Every dot is one return, drawn to scale, so this is the real shape of the trees. The ground falls away to the east, and each height is counted from the ground straight under the treetop.

trunk, branches and needlesground

Tap a dot for its height.

From above: the height model

The same forest seen from the plane. Each square is 20 inches across and takes the height of the highest return that landed in it, less the height of the ground beneath. A treetop is a square taller than everything within 10 to 16 feet of it.

0 ft200 fta treetopthe slice in the side view

Tap a square for its height.

How far to trust a height

  • The top is well sampled. 25 returns landed within 3 feet of this tree's highest one, and the top four agree to within 0.3 feet. It is not one stray point.
  • The outline is coarse, the height is not. A crown is a blob of 20 inch squares, so a dot on the map can sit a few feet from the trunk. The height comes from single returns, each typically good to a few inches.
  • The ground is the weak part. Only about 1 return in 8 here reached the forest floor, and heights are measured from a ground surface drawn between those. On steep ground that surface is less sure, which is why trees on a slope get a dashed ring on the map.
  • If a height is off, it is more likely short. A laser usually misses the thin tip of a conifer, so real trees tend to be a little taller than their LIDAR height.
  • Two trees can read as one. Crowns that touch can merge into a single treetop, and a big tree with two leaders can show up as two.

Sources

Laser returns: King County's 2021 survey, from the public USGS 3DEP copy, about 25 million of them over the park. Trails and the park boundary: Seattle Parks and Recreation. The idea came from a map of 100,000 trees over 200 feet around Seattle.